Tag Archives: Home Improvement Hardware Finishing by Installing Hardware Knobs and Pulls

Home Improvement Hardware Finishing By Installing Hardware Knobs And Pulls

Changing the hardware of the cabinets and drawers is the easy way for updating them. A plain piece of furniture can be modernized by a new cabinet knob or drawer pull, a faux aged or antique cupboard can be matched, a charm should be added to a nursery dresser or a broken pull should be replaced, so getting onto the drawer can be done without taking a crowbar for prying it open. The simple installation techniques can be mastered by all of these good reasons for the occasions when swapping new-for-old pulls using the same holes cannot be done. One hole should usually be taken by a knob and two holes should usually be taken by a pull, 3/16 inch is a general size for the screws.

Unique Kitchen Cabinet Knobs
Unique Kitchen Cabinet Knobs

If you have a plan to install the knobs and pulls, the instruction steps below can be followed to be a consideration to complete and even realize your plan. So, let’s check this out!

Pulls and Hardware
Pulls and Hardware
  • The place of the knob or pull that will go on the furniture should be decided. Usually the people place a cabinet knob 1 ½ inches from the opening and vertical edge of a cabinet and 2 inches from the bottom of the cabinet on upper cabinets. They also center the single drawer pulls at least 3 inches from the top edge of the drawer. Those measures can be used as a guide, but the best placement for your furniture should be determined. It should only be kept throughout all pieces.

 

  • A piece of blue should be stuck on where you will mark and drill it for the drill holes. The tape peels off later with no residue and no problem and marking on the wood or cabinet surface can be saved, in case a mistake should be made by you and it should be remeasured. All holes to be drilled should be measured and marked.

 

  • The point of the nail should be placed on the mark for every hole and a starter hole for the drill bit can be created by tapping it with the hammer lightly. Guiding the drill and steadier can still be kept can be helped by this.

 

  • The holes should be drilled from front to back and outside to inside. The accidentally splitting the wood will be prevented by this. The sawdust should be wiped and the blue tape should be removed.
How to Install Pulls & Knobs For Cabinets
How to Install Pulls & Knobs For Cabinets
  • The screw should be inserted from the back or inside and a washer should be slipped over it where should be poked through the wood. The knob should be twisted onto the screw and washer on the outward facing panel. A drawer that against the screws should be placed. After they are safety fastened, turning should be stopped, so stripping the screw or splitting the wood can be avoided. Note that a washer will not be hidden by some knobs and pulls after they have been installed. In that case, the washer should be skipped.

Better Homes and Gardens Kitchen Renovation Challenge

Better Homes and Gardens Kitchen Renovation Challenge

Our home is the place where we feel comfort all the time. That is why many people are eager to make the best home and the most comfortable one so they can enjoy being in the house and interact with the other family members. The usual thing that people do with their home is to renovate and modify the things they don’t like from the house. But usually, this kind of thing will be very expensive and can drain the home owner’s budget. But you can actually get this very affordable by getting yourself into the better homes and gardens kitchen renovation challenge.

Better Homes and Gardens Kitchen Renovation Challenge

The Affordable and Better Homes and Gardens Kitchen Renovation Challenge

The challenges that you will do in this activity will be divided into three types of job. They are the job to renovate the whole house, the renovation on the gardens and the modifying your kitchen to make it more beautiful. But the thing that you need to understand is that you are going to challenge yourself by doing it with only a very low budget.

The challenge that you can do with your bathroom on the low budget is to renovating the whole bathroom and renewing the old fixture in it. The tiles in the bathroom can be changed to something newer and more moderns, such as using mosaic forming tiles for the walls or the black and white tiles for the floorings.

Better Homes and Gardens Kitchen Renovation Challenge

Meanwhile, for the fixtures, you can uninstall the old ones and repainting them or sanding them to make them look new again. This will definitely save a lot of your budget and still make a great appearance for your bathroom.

For the gardens part of the better homes and gardens kitchen renovation challenge, you can choose to use the cheap and affordable yet high quality objects to be placed on the gardens. This is rather easy actually since most of the plants that you want to place in your garden will only cost you a little. But the real challenge is the things that you should put in the gardens, such as the table and outdoor chair.

For that, you can buy the pre-made wooden chair from the dealer in your local, but you can also make your own simple chair with a lower budget. This will be done easily by making the plan of the chair and buy some supplies to make the chair.

And the last part for this challenge is how to make the kitchen to look better than usual, and still with the low budget ideas. One of the ideas that you can do is to remake the kitchen island and the countertops.

The easiest and cheapest way to do this is to use the wood and put them on the old counter. You may need to screw them to make sure they will stay in the place. But don’t forget to always sand them to make them smoother and easier to use. And the last thing you may need for this better homes and gardens kitchen renovation challenge is to use the polyurethane liquid to cover the whole surface of your new countertops.