Tag Archives: Fiberglass Bathtub Repair and Crack

How to Repair the Tub Liner Crack

How to Repair the Tub Liner Crack

A tub liner is a form of  sheets made out of PVC that are formed particularly to act as the functional part of a bathtub.   People often usually need to repair this when the bath tub has some issues, such as being cracked, broken or rusty. Repairing a tub liner is a solution for this when you don’t want to spend a lot of money to replace the broken tub. But even though this could be the solution for the problem, repairing the tub liner itself is not more durable than refinishing or replacing. One of the problems that we will see is the tub liner crack. And the question is of course, how do you repair the cracks in the tub liner?

How to Repair the Tub Liner Crack

How to Use the Tub Liner to Repair the Bathtub

  1. Get to the hardware store and choose the particular liner to repair the tub liner crack for the bathtub. Every bathtub will have a different size and form and it will be required that you pick the one that has the same one as  you have. If you are not sure about this, make sure that you have noted the type of  bathtub and match it to the same type on the store. Or you can also ask the store or the others to make a liner that will  fit perfectly with your existing tub.
  2. Clean the bathtub before repairing it and make sure it has been dried out completely before installing the new tub liner over the crack. If you need to, put some epoxy on the broken parts of the tub to cure the problem. This will not relieve the broken parts on the tub completely but will prevent the future leakage of the tub if the liner is broken again.
  3. You can now start repairing the bath tub liner crack with the right position based on the types of the tub. If needed, make sure that you have screwed some holes on the surface of the tub to make the liner stay in place and last longer for the usage. Wait for about 12 to 24 hours before using the bathtub to make sure the liner will stay in its place.

How to Repair the Tub Liner Crack

Repairing the Tub Liner Crack

Using epoxy will be the main thing that you can do for the repairing of tub liner crack. But first, make sure that the cracks are still small enough that it will be sufficient for you to fix it with only simple method. If the broken parts are too extreme, it will be better for you to replace the liner completely and install the new one. And with the epoxy, you will only need to place the compound with the help of the knife in the crack and wait for it to be dry.

The other thing that you can use to repair the tub liner crack is using a patch of fiberglass or the same material as the liner. You will only need to stick the patch on the cracked parts and let it dry. If required, you can also make the hole with a drill and put the patch on covering the broken parts.

How to Repair the Cracked Fiberglass Shower

Tub Cracks

Fiberglass has been one of the materials that is used to make a lot of fixtures around the home. This will include the shower pan and base that are made from the fiberglass. The reason behind this could be caused by the fact that the fiberglass is not only cheap, but it is also very durable and not easily broken. But still, cracks in the fiberglass can still happen if something heavy enough is dropped on it. Fortunately, there are the easy steps that you can do to repair the cracked fiberglass shower in the bathroom.

Repairing a fiberglass shower that is cracked will be much cheaper that buying a new shower pan. You will need to spend more than a hundred dollars to buy a new fiberglass shower. But you can make it a lot more affordable by using patches to cover the cracked areas of the fiberglass. Here are the things that you can do to repair your cracked fiberglass shower:

tub cracks

Easy Steps to Repair the Cracked Fiberglass Shower

If you have spotted the cracks that are on the surface of the fiberglass shower, it will be best if you mark the areas with a contrast color to make it easier for you to spot them when the repair is started. Also, measure the cracked areas so you can get the right shape of the patch to cover the broken area. Make sure it will be sufficient to cover the whole broken area of the fiberglass shower.

On the other hand, you can buy the fiberglass material that has the same color as your cracked fiberglass shower to cover the broken parts. Cut the fiberglass to cover the bigger size of the cracks and make sure they will be able to cover the whole area. If you have any uneven surfaces on the sides of the patch, then use the sand paper to make them smoother.

Then, you can go back to the installed shower and make small holes on each of the end of the cracks. You can easily do this with the drill but be careful not to break any parts and make it look worse than it already does. Clean the holes from the debris to make sure the patch will attach flawlessly.

How to Repair the Cracked Fiberglass Shower

It is better if you have the epoxy compound to repair the broken shower on the bathroom. This will not only glue the patch onto the fiberglass, but it will also cure the cracked parts of the fiberglass shower. You can buy it from the hardware stores and use some of it on the cracked parts with the help of the utility knife. You should also spread the epoxy on the surrounding areas of the cracks as the glue for the patch.

Finally, you can stick the patch on the cracked fiberglass shower and wait for them to dry completely. Clean the whole are and avoid wetting the repaired area for about 24 hour after the process to make sure they are fixed thoroughly.

Fiberglass Bathtub Repair and Crack

Fibergl

ass bathtub repair

Bathtub repair or refinishing is the alternative way that can make your bathtub look new and different. Bathtub refinishing is also useful to repair a broken on your bathtub such as crack, chip, getting wrong color, and off course hard to clean.

If you need a new bathtub, with refinishing is a great ways. You can see a new look to your bathtub with refinishing or repair. With this process you can save money. Repair or refinishing can you do for all bathtub types such as fiberglass bathtub, cast iron bathtubs, and many others.

If you get a crack or chip to your bathtub, you no need to replace or change with a new one. with this process it definitely can help you solve your problem. Repair your bathtub as you want to make it good look. To perform this process you no need hire a professional. You can repair it yourself without helped of professional. Repair the fiberglass bathtub is simple and easy ways. So, check below this for more information.

–          The first thing you need to start this process is rotary tool, 240 sandpaper, 400 sandpaper, gel coat enamel, fiberglass epoxy resin, scratch pad, and plastic resin applicator.

Cracked Fiberglass Bathtub
Cracked Fiberglass Bathtub

–          Looked at the crack on your fiberglass bathtub. And then determine what the size of fiberglass crack. Crack is usually deeper and longer so you should analyze how deep cracks on the bathtubs.

–          Step one is use the rotary tools with a tungsten carbide cutter and drill hole at each end of the crack to minimize spreading. This perform also determine the depth and length if the crack.

–          The next process is preparing the scratch pad. Scratch pad is used after doing the step ones. The scratch pads are helps to smooth any rough edges around the crack. Make sure you will rub the entire crack around the tub. Scratch pad also useful to clean away any residue around the cracks.

How to Repair a Fiberglass Bathtub
How to Repair a Fiberglass Bathtub

–          Cover the crack with fiberglass epoxy resin. Cover entire crack on your bathtub with a fair amount of fiberglass epoxy resin using the plastic applicator. Make sure that the fiberglass epoxy resin will completely filled to the edges.
How to Fix Cracked Bathtub
How to Fix Cracked Bathtub

–          Leave it on until dry. Do not touch the area in the bathtub. Let the fiberglass resin epoxy is completely dry. See the manufacture’s direction how long it will be completely dry.

–          Prepare the 400 sandpaper and 240 to the next process. First, sand the crack area with 240 dry or wet sandpaper until hand smooth. And then if the process is complete, you can give again with 400 wet sandpaper.

How to Repair Cracked Bathtub
How to Repair Cracked Bathtub

–          We are almost done. Apply gel coat enamel into crack bathtub. Or you can apply sealer to the repaired fiberglass crack area.

–          Now, you can enjoy with a new bathtub without having to change or buy a new one.

So, follow our tips to repair your crack fiberglass bathtub. It so simple and easy, right.

 

Incoming Search Terms:

fiberglass bathtub -