Whether a new home would be built by you or an existing one would be remodeled, one of the most important components that should be ensured is the electrical system. Convenience and safety arte a factor, and the needs of a home that cannot be handled by the electrical system can be not only headache, but a problem if selling your home later that should be wanted by you. An electrical plan will be required by the building inspector, and in the case of an older home if the electric service is outdated you upgrading to higher amp system that codes should be met might be required.
If you have a plan to determine the electrical service requirements for your house, the instruction steps below can be followed by you to be a consideration to compete or even realize your plan. so, let’s check this out!
Your local building department should be contacted and a copy of the electrical codes for building and remodeling should be asked. Your plans should be talked with the building inspector and any advice or tips they have should be gotten for you before it should be started.
The service to your home should be determined whether your home is out of date and upgrading should be needed. For the example is some older house that have only 60 amp services. When you build these homes, the electric appliances such as air conditioning, microwaves and electronics didn’t exist in house.
A diagram of your house and each electrical circuit should be drawn. the additions you are making should be included if it should be added by you on to the house and all new circuits that will be built, if you are easily remodeling. Each electrical circuit in the rooms should be marked and then how each room that will be used should be determined.
A list for each room of all the electrical appliances should be made. A rating of power usage in watts should be included in the most of it. Adding in the furnace, AC and any other mechanical system you have that the electrical service should be required should be ensured.
The load from your central heating system or air should be determined; whichever is the largest by the rating on the appliance that should be found. This number should be added to the total separately.
The square footage of the occupied areas of the house should be calculated. The basement should also be included if it will be used for more than storage like a rec room.
Together of the square of footage should be added to watts calculation; you have to calculate the total watts of appliances and then the numbers from your big systems such as the air conditioning.
Both of the wiring codes that have been received from the building department and any information that you get from the electrical contractor should be consulted if you have hired one.